Even within the centrifuge drum parts are used as corrosion-resistant material (such as stainless steel); If for various reasons can not or will not allow this use, should be used in corrosion-resistant lining inside the centrifuge, spray plastic.

 Regular checks of the centrifuge drum and other important parts of the corrosion, if it is found severe corrosion should be repaired or replaced; case should be of high quality steel or stainless steel, and to ensure that its manufacturing quality.

 Centrifuge maintenance repair

 Good maintenance and repair of centrifuges is an important guarantee for its safe operation, the centrifuge 700 to 1400 running hours after minor repairs should be carried out; run from 3000 to 4000 hours after the repair; injury or drum when the shaft corrosion, rim fracture or a round drum with loose shell and when they should overhaul. Minor repairs to clean the bearing components generally make up for screen, tighten all bolts. In centrifuge repair, replace screen, brake band, check the bearings, replace the rubber shock absorbers. Overhaul the centrifuge replacement rehabilitated fully washable inspection.

上一篇：One case of corrosion resulting from the cause of the breakd   下一篇：Centrifuge Repair and maintenance of preventive measures

who read this article also read